Saltar al contenido principal
L

dsh-task-worktree

letter2025/dsh-task-worktree

Árboles de trabajo git con alcance de tarea para DSH: manifiesto duradero por repositorio, el modo worktree inyecta una instrucción de creación con tu primer mensaje bajo un prefijo de rama worktree/ automático, insignia en el encabezado en lugar de desorden en el espacio de trabajo, y limpieza con bring-back o force-remove.

Instalar

dsh plugin --profile web add github:letter2025/dsh-task-worktree

README

dsh-task-worktree

release downloads stars license docs Awesome DSH Plugin

Complete Git worktree support for DeepSeek Harness.

A community plugin that gives DSH the task-scoped worktree workflow of Qoder / Codex / Claude Code: each task gets its own isolated git worktree checkout on its own branch, recorded in a per-repo manifest so it survives sessions and restarts. The main workspace stays untouched; conversations that use a worktree are marked with a branch badge on the session header (no workspace entry is created), and the changes can be brought back (Move to local) or committed directly on the worktree branch — always under explicit human control.

It follows the design of Qoder's Worktree execution environment, Codex's codex worktree create --permanent, and Claude Code's --worktree sessions, adapted to DSH's session/workspace model.

Design

Concept (this plugin)QoderCodexClaude Code
Task-scoped isolated checkoutWorktree execution environmentcodex worktree create --permanentclaude --worktree <name>
Worktrees live in <repo>/.dsh-worktrees/background worktree checkout.codex/worktrees/.claude/worktrees/
Durable registry survives restartsper-sessionglobal indexsession binding
Own branch per taskbranch selector—worktree-<name>
Open as a DSH workspace from the GUIpanel selectorcodex worktree openlaunches into the worktree
Mark the conversation using the worktreesession badge——
Bring changes back to mainMove to local—exit/cleanup prompt
Direct commit on the worktree branchReview & commit panelcommit in the worktree sessioncommit in the worktree
Carry uncommitted main changes inInclude uncommitted changes toggle—.worktreeinclude
Auto-ignore the worktree directory——.gitignore tip

How it works

Blank conversation: the mode selector above the composer follows the configured
default (Settings → Plugins → Task worktree), or pick "Worktree mode" yourself
   │  optional branch name (auto-prefixed "worktree/")
   │  send the first message → the host injects an instructions context block
   ▼  the model calls worktree_create on that same turn
   │  git worktree add -b worktree/<name> <repo>/.dsh-worktrees/worktree/worktree/<name>
   │  NO workspace is registered, NO conversation switch — the session header
   │  badge marks the worktree this conversation uses
   ▼  work continues in the same conversation (the model uses absolute paths
      inside the checkout); when done the model reminds you how to clean up
   │
   ├─ /worktree bring-back worktree/<name>   → merge the branch into the main branch
   │                                            (requires a clean main workspace)
   ├─ /worktree finish worktree/<name> <msg>  → commit on the worktree branch, keep it
   └─ /worktree remove worktree/<name> --force→ delete the worktree + branch
                                                (--force also deletes uncommitted changes)
  1. Start in worktree mode: on a blank conversation the dock selector shows 「Branch:」 before you send anything — picking "Worktree mode" ARMS the session, and the branch-name field is optional (typed names are auto-prefixed worktree/, blank lets the model propose one). The mode selector disappears once the conversation starts; the session-header badge takes over the indication. Set the default mode once in Settings → Plugins → Task worktree and every new conversation starts that way (see Settings).
  2. Send your first message — the host injects one instructions context block (shown as 上下文注入) right before your message: create the worktree with a worktree/-prefixed branch, work inside the checkout path, and at the end remind the user with copy-paste cleanup commands (bring-back or remove --force).
  3. Or skip the mode and ask the agent directly: "用 worktree 隔离干活,任务叫 xxx" — the model calls worktree_create; the name is both the branch and the relative path (slashes allowed).
  4. No workspace entry is created, so the sidebar stays uncluttered. The badge on the session header shows the branch name while the conversation is in worktree mode.
  5. When done: bring-back / finish / remove (all human-only, as above); /worktree list / status / prune inspect and clean up (prune also drops stale workspace registrations for removed checkouts).

Install

dsh plugin --profile web add dsh-task-worktree

Requires: DeepSeek Harness 0.2.2-rc.1+ (verified against 0.2.2-rc.3), Git 2.31+, Node 20+.

Settings

The plugin declares a volatile Config; DeepSeek Harness turns it into a settings form served under this plugin's profile entry id, dsh-task-worktree. The card lives on the sidebar Plugins → dsh-task-worktree page (bundled plugin configuration); the settings service's auto-generated page is suppressed so the fields have exactly one surface.

One setting — the mode a new conversation starts in — with three choices (they are exactly the three states there are; a mode plus a separate "remember" switch would describe a fourth one that means nothing):

Choice in the panelStored in dsh-task-worktreeMeaning
Local modedefaultMode: local, rememberLastChoice: falseEvery new conversation starts in the main workspace.
Worktree modedefaultMode: worktree, rememberLastChoice: falseEvery new conversation is isolated: the host injects the worktree-creation instruction with the first genuine message, no selector trip needed.
Remember the last choicerememberLastChoice: trueThe mode you picked last above the composer wins; defaultMode holds that pick.

The default is Local mode. An installation that never opens the card keeps behaving exactly as it did before this setting existed: new conversations start in the main workspace, and a pick in the composer selector applies to its own conversation only.

The chosen mode applies to conversations that start empty. Picking Local mode in the composer selector is an explicit answer for that conversation: the host does not auto-arm it, whatever the setting says.

The values live in this plugin's profile patch entry, so they can also be set by hand and take effect live:

- id: dsh-task-worktree
  config:
    defaultMode: worktree
    rememberLastChoice: false

On a host without the settings service the plugin keeps working with the composed defaults (local mode), and the card simply does not appear.

Model tools

ToolPurpose
worktree_create {name, baseCommit?, includeUncommitted?}Create a task worktree (name = branch and relative path, slashes allowed); optionally carry uncommitted main-workspace changes in
worktree_listList the repository's managed worktrees (state / dirty / branch)
worktree_status {name?}Status of one worktree, or the one the current session is inside

Delivery and cleanup actions (finish / bring-back / remove) stay human-only — the model never reaches them.

Human commands

/worktree mode-on [<name>]     arm worktree mode (injection with the next message)
/worktree mode-off             disarm worktree mode
/worktree create <name> [<base>] [--carry]
/worktree list
/worktree status [<name>]
/worktree finish <name> <message>
/worktree bring-back <name> [<message>]
/worktree remove <name> [--force]
/worktree prune

Safety model

  • @deepseek-ai/* are peerDependencies only — the host supplies them; the plugin never installs infrastructure copies into a profile (a second instance breaks TOOL_RUNTIME_SCHEDULER's unique symbol and kills tool calls).
  • bring-back requires a clean main workspace (MAIN_DIRTY) and refuses to run from inside the worktree.
  • remove refuses the worktree the current session is working inside (IN_USE).
  • All git operations go through ctx.subprocess (harness-managed); the test path uses a child_process runner.
  • Manifest writes are atomic (tmp + rename); prune drops records whose checkout no longer exists.

Local development

npm test              # smoke (worktree lifecycle) + host half + browser prefs
npm run typecheck     # client TypeScript
npm run build:client  # rebuild client/client.js (tsdown + lightningcss)
npm pack --dry-run    # inspect the tarball before publishing

The suites: test/smoke.mjs (git lifecycle on a scratch repository), test/host.mjs (the real apply() on a fake cordis context: settings config and page policy, arming policy, injection), test/prefs.mjs (the browser preference store; needs Node 22.6+ and skips itself on older runtimes).

License

MIT — see LICENSE

Plugins relacionados