Passer au contenu principal

Plugins

Parcourez, filtrez et installez des plugins DeepSeek-Harness.

120 plugins trouvés

T

dsh-session-slim

turingcorp-net/dsh-session-slim

On open, rewrites a session stored log down to the visible conversation and archives the original, so a 68.6 MB session resumes from 90 KB instead of loading about 1.2 GB into memory (one migration of roughly 10 s, then instant). The last permission preset and model choice of the session are carried over, the original stays under archive/ for a one-command rollback, and a session another process owns is left untouched.

0il y a 3 joursSessions et messagesMIT
R

dsh-answered-questions

ryuu-64/dsh-answered-questions

Review answered questions in DeepSeek Harness (DSH): keep all options, selected answers, and free text visible, including dsh-choice cards.

0il y a 5 joursAméliorations UIMIT
C

dsh-desktop-notify

chengzhi43/dsh-desktop-notify

Sends a desktop notification when a turn finishes or the agent waits for your choice, and a click returns to that conversation.

0il y a 5 joursIntégrations et accès distantMIT
Z

dsh-vertical-kit (dsh-adr-check)

zjukop3/dsh-vertical-kit

Architecture decision record hygiene: a status, the context that forced a choice, the decision itself, consequences that include the cost, and the alternatives that lost. Its HTTP routes have no DSH access check, so a web page open in your browser could call them.

0avant-hierOutils et capacitésMIT
H

dsh-octagon-alerts

hexa-center/dsh-octagon-alerts

Plays a synthesized chime when a Session needs a choice, needs approval, or finishes while you are away, with a pickable chime and a volume slider for each moment.

0il y a 6 joursIntégrations et accès distantMIT
H

dsh-plugin-trim

haidai233/dsh-plugin-trim

Trims the tool surface per session. Each session owns a profile — a tool whitelist — applied through `agent.ctx.tools.restrict({ allow })` on that agent scope only, and switching one session never touches another; `full` is the built-in no-restriction profile. The provider only picks the default: a session created or switched onto a local provider (explicit `localProvider`, `routes`, a loopback/private baseURL, or a local-ish id) gets the `local` profile, a cloud one gets `full`, and the re-plan runs on model-selection events plus one delayed pass because the projection can land after the event. Profiles are editable from the panel and persisted under `~/.dsh/plugin-trim-state.json`; an explicit per-session choice overrides the provider default until cleared. A separate, opt-in layer physically disables whole plugin entries through `pluginManager.setPluginEnabled` — that one is profile-scoped by API and the panel labels it as such rather than pretending it can be per-session. A `tool_trim` tool exposes list/status/profile/set/apply/restore to the model. The panel is served by a loopback-only HTTP server the plugin starts on its own fixed port — `http://127.0.0.1:12256/` (auto-bumps on collision, configurable) — because the DSH port changes on every restart and a locally linked package gets no market card in the sidebar; it lists live sessions with their profile and tool count, an editor per profile, a provider picker limited to providers declared in the profile or currently in use, and the full plugin list with search and paging. Two implementation details worth knowing: `tools.restrict()` is an intersection and cannot widen, so the old restriction is released before the visible set is read — otherwise switching to a bigger profile would shrink instead of grow; and every disposer is registered on `ctx.effect`, without which a hot reload leaves an unremovable restriction behind. Measured on a 12GB laptop GPU with a 27B model and a fully resident 256K cache, same conversation: 105 tools / 56,306 prompt tokens / 22.5 tok/s decode, 62 / 34,207 / 43.0 after disabling three tool-heavy plugins, 14 / 12,890 / 66.8 after a session moved to the local profile, with prefill rising from 487 to 1,310 tok/s. Restricting also drops the skill catalog injection, roughly 4.3K more tokens. Its HTTP routes have no DSH access check, so a web page open in your browser could call them.

0il y a 7 joursOutils et capacitésMIT
T

dsh-connect-comate

tsd619124/dsh-connect-comate

Registers the Comate (Zulu) models of a locally signed-in Comate CLI as a DSH provider, supervising a loopback `zulu serve` and translating its SSE into the DSH stream. One Comate conversation is reused per DSH session, an interruption that waits for a choice becomes a visible question you can answer in the next turn, the reasoning effort and image input the roster advertises are actually forwarded, a Settings section trims the model picker to the models you tick, and a `comate_usage` tool reports real token usage plus the daily credit. Its HTTP routes have no DSH access check, so a web page open in your browser could call them.

0il y a 6 joursModèles et fournisseursMIT
Y

dsh-plugins (sidebar-pins)

yggizz/dsh-plugins

Remembers which left-sidebar panel launchers you unpinned and re-applies that choice on every start, so the entries you folded away stay folded instead of coming back as a full row of buttons. It adds no interface of its own: it only restores the sidebar's own display state, writes nothing outside the profile, and does not reach the network. Disabling it returns the sidebar to stock behaviour without deleting the saved choice. This is the unpin list only — for panel reordering, grouping, search or drag-and-drop, a fuller sidebar manager is a different plugin.

0il y a 3 joursAméliorations UIMIT
S

dsh-search-pull

studentbuilding-studio/dsh-search-pull

Pushes the agent to search the web before answering instead of relying on memory — especially for library choice, version and error questions, where reusing an existing open-source solution beats reasoning from scratch.

0hierMémoireMIT
H

dsh-sidebar-panel-visibility

hzsfn/dsh-sidebar-panel-visibility

Adds a show/hide toggle for each sidebar panel entry to the sidebar More menu, one row per panel with its current state; the choice is stored in localStorage and replayed when the plugin reloads. The Plugins entry stays fixed and cannot be hidden.

0il y a 12 joursAméliorations UIMIT
Z

dsh-mac-notifications

zhiquanchi/dsh-mac-notifications

Native macOS Notification Center alerts for DeepSeek Harness when the agent asks for your choice, a task completes, or a task fails, with per-scenario switches, background-job suppression, and click-to-open the session.

0il y a 13 joursIntégrations et accès distantMIT
G

dsh_tray_follower (dsh-tray-follower)

green233233/dsh_tray_follower

Per-workspace DSH conversation status in the Windows system tray, plus native DeepSeek Harness notifications when a conversation needs approval, a choice or free-text input, completes, or fails. Windows 10/11 and DSH Desktop 0.2.3-rc.1+ only. The tray menu and notifications work only after a one-time desktop bridge install (user-level, reversible): it repoints the DSH shortcut at a hidden launcher that injects a hook into DSH's Electron main process through a short-lived loopback Node inspector; without the bridge the plugin only writes state.json. Idle conversations stay out of the tray by default; nine live options are editable in a Tray follower settings page.

0il y a 13 joursIntégrations et accès distantMIT
Y

dsh-focus-board

yyj-python/dsh-focus-board

Cross-session task ledger for DeepSeek Harness: one item per request with a step chain, an accordion strip above the composer, unfinished items injected into every step, staleness review with artifact fingerprints, clickable choices that learn repeated decisions, a grant ledger whose four-mode control sits inside every authorization-blocked card, blind-work backfill checklists, and a scheduler that re-judges an item only when a new assistant answer mentions it.

0il y a 15 joursSessions et messagesMIT
G

dsh-session-git

glk1220/dsh-session-git

Merges the work done in a forked session back into the session it came from: /merge turns the branch's session log into a digest without a model call (each turn's prompt and reply, files changed, commands run, choices you made, to-dos and the final answer) and delivers it with your next message, or at once with --wake; merging the same branch again brings only the turns added since. Also adds /branches, a right-sidebar branch map with merge state, a reminder above the composer for branches with unmerged turns, and session_branches / session_branch_merge tools for the agent.

0il y a 3 joursSessions et messagesMIT
A

dsh-prompt-boost-model

amyaxy/dsh-prompt-boost-model

Prompt enhancement for the DSH composer, with a model picker that lists the models the host actually offers: a Boost button beside the composer sends the current draft to a model on the Host, shows the rewrite in a before/after overlay, and replaces the draft only when you confirm. While boosting, the button glyph becomes a spinning arc; once a rewrite is applied the same button becomes an in-place Undo that restores the original draft and then returns to its idle state. Settings hold the enable switch, a provider/model choice rendered as a grouped dropdown built from the live provider list (including configurable providers that are not set up yet) rather than free-text fields, temperature, output limit, timeout and optional custom instructions. Empty or reasoning-only model answers are reported with their real cause instead of a generic failure, and the Host endpoint only answers loopback requests from the same origin.

0il y a 10 joursAméliorations UIMIT
R

dsh-xhs-style

refreshing-czq/dsh-xhs-style

Adds a requirements-discovery gate before product selection, version choices and competitive analysis: 2–3 clarification rounds with 2–4 decision-changing questions, validation of real pain points and hard constraints, comparison of original, alternative and minimum-cost routes, and a confirmation card before research and copywriting. Confirmed reports keep the Xiaohongshu-style structure, concrete steps, audited images and source links. Ordinary lookups and explicit user skips bypass the questionnaire. Host-only static prompt sections with no config, client UI or dependencies.

0il y a 8 joursIntégrations et accès distantMIT
L

dsh-window

lczment/dsh-window

Window close behaviour for DeepSeek Harness Desktop — ask, minimise to tray, or quit, with a remembered choice editable in Settings, plus per-session and per-workspace child windows. Windows only: requires DSH Desktop 0.2.1-rc.5+ and a PowerShell installer that patches the app shell (resources/app); re-run it after every DSH upgrade, otherwise closing keeps DSH default behaviour.

0il y a 16 joursAméliorations UIMIT
H

dsh-sticky-wall

hahajing233-source/dsh-sticky-wall

Sticky notes on a wall, with five paper stocks, five inks, seven typefaces, four text sizes and your choice of pin, tape or clip.

0il y a 14 joursAméliorations UIMIT
M

dsh-panel-fold

meihuaanying/dsh-panel-fold

Folds the DSH sidebar's global panel launchers into the More button it already renders, so the workspace and session list below regains up to seven 36px rows. A row in the More menu toggles the fold back, and the choice is kept in localStorage.

0il y a 18 joursAméliorations UIMIT
L

dsh-subagent-tiering

lucagiftzek/dsh-subagent-tiering

Fills in a cheaper sibling route for subagent calls that name no provider, model or effort (for example Opus to Sonnet 5.5 at medium, Qwen max to Qwen flash); explicit choices and subagent_fork are left alone. Requires the subagent-model-selection policy to be enabled with the target route in its allowedModels - without it the plugin does nothing.

0il y a 21 joursModèles et fournisseursMIT
J

dsh-speed

jakehemmerle/dsh-speed

Adds a Speed setting (Standard, Fast, Ultrafast) for OpenAI and Codex models on a patched dsh build: the pinned dsh 0.2.1-alpha.2 web client needs the Model / Effort child-slot patch, the host pi-ai must be 0.87.1 or 1.1.0 (other versions refuse to load), and the terminal controls need a patched dsh-TUI. Then it appears in the Model / Effort menu; in dst /speed opens a picker or sets the speed directly, and the current speed shows in the bottom bar. The choice is kept per session, provider and model and is sent as the request service tier.

0il y a 29 joursModèles et fournisseursMIT
X

dsh-rules

xulei666a/dsh-rules

Couche unifiée de règles et consignes pour DeepSeek Harness. Centralise les consignes de chaque agent dans une bibliothèque locale, distingue default (toujours actif) de local (domaine de tâche) et synchronise l’ensemble effectif dans la section gérée de AGENTS.md. Ajoute routage sémantique, arbre de classification et page de gestion/panneau latéral droit. L’assistant du panneau peut réunir les consignes existantes, calibrer et reclasser les règles en attente, puis signaler un registre de problèmes par responsable. Pour les copies : clic droit pour déplacer/copier, copie de dossier et accès à l’origine. Suit aussi les points de décision avec conflits de branches et le choix de branche par session.

0il y a 21 joursMémoireMIT
S

dsh-sap-ai-core

solstice621/dsh-sap-ai-core

Fournisseur SAP AI Core avec OAuth partagé, cinq choix de modèles Qwen, budgets de raisonnement, streaming et appels d’outils ; validé sur cn40.

0il y a 4 joursModèles et fournisseursMIT
J

dsh-theme-leshan

john-20260101/dsh-theme-leshan

Trois thèmes photo pour l’interface Web DSH : River Night (三江夜), Lingyun Dusk (凌云晚照) et Emei Mist (峨眉夜雾). Chaque photo de Leshan couvre la fenêtre et la colonne de conversation avec un voile lié à l’apparence. Un moteur dérive les 119 autres jetons alias --dsw-* à partir de six entrées de couleur par apparence. Alt+K change de thème et le choix est mémorisé dans localStorage.

0il y a 22 joursThèmes et apparenceMIT