dsh-agents-notch

An always-on-top notch for DeepSeek Harness that answers one question: which of my sessions needs me right now?

Install · What it shows · Configure · Limits · Develop · 中文

_{Recorded from the window itself (--record), frame by frame — not a mock-up.}

Why

If you run more than a couple of sessions, finding out whether anything is waiting on you costs a context switch every time:

The notch is a small always-on-top tab that never takes focus, hides under a full-screen app, and shows the one thing the sidebar cannot while you are in another window: a session stuck on you. When one gets stuck, the tab grows into an alert that says why, with an Open button that switches the app to that session — from wherever it is, minimized or in the tray. Hover the tab and the board unfolds.

What it shows

That strip is the whole visual language. Working wears a slow blue arc and nothing else, because working is the quiet default — and while any session is running a tool, light runs along the tab's lower edge. Needs you wears amber, done green, failed red. Every session keeps its own colour on the bot's rim, so three sessions read as three sessions rather than three copies of one.

The tab speaks up

When something new happens — a session asks for you, fails, or finishes — the tab grows into an alert for a few seconds and then folds back. Open takes you straight to that session. Only fresh events are announced: a question that has been waiting for an hour is on the board, not in your face.

The board

Hover the tab and the board unfolds. At the top is the session that changed most recently, so a finish or a question is what you see first: its title, its project and age, how full its context is, and one line of what it is doing — the tool it is running and the step, the question it is asking in full, or how it ended. Below it, every other session in one list: what it is doing in a word and how long ago. More sessions than fit? The list scrolls.

Click a row to put that session on the big bot. Double-click a row, or press Open ↗, and the app switches to it. A finished or failed row has a ✕ that closes it out — the same as ticking it in the app.

Sixteen faces

The bot's face is the state, read closer. A working bot is focused in a tool and thinking between tools, determined on a long busy turn and tired after half an hour; it is confused when a tool just failed and dizzy when they keep failing. It pleads when it needs you, squints ^^ when it is done, and falls asleep when the host goes quiet. It blinks, follows your pointer with its eyes, and plays a short motion on each change — once, and then it rests. A board that keeps celebrating something that finished an hour ago is noise.

Requirements

• Windows 10/11, x64. The window is WPF and Win32 (topmost, no-activate, fullscreen detection): there is no macOS or Linux build. package.json declares "os": ["win32"].
• DeepSeek Harness. Built and verified on 0.2.1-rc.2. The host half reads session/event ({ global: true }), ctx.webServer, ctx.agents and sessionQuery, and the in-app half uses uiWorkspace; an older build may lack one. Nothing is checked before mounting — see Limits.
• Node ≥ 22 for the plugin. No .NET runtime: the released window is self-contained.
• Optional: the session-finished plugin, which is what retires a finished row (What earns a row).

Install

dsh plugin --profile web add dsh-agents-notch

Running the harness under another profile? Put its name in place of web.

The plugin is ~30 KB. The first time it runs, it downloads its window (one 65 MB file, no .NET runtime needed) from this repo's GitHub release and checks it against the published SHA-256. A few seconds later the notch is at the top of your screen.

No notch? Look at the last line of $DSH_HOME\state\agents-notch\host-report.jsonl: it says where the host looked for the window, whether the download worked, and the command that fixes it.

Configure

The notch has a pane of its own: Settings → Agents Notch. Size, anchor, display, rows, opacity, motion and the text switches live there, and a change lands on the notch immediately — the window re-reads its state on the next tick, so nothing restarts.

Three layers decide a value, each beating the one above it:

1. the built-in defaults;
2. the plugin row's config: — the file you edit, which nothing overwrites;
3. $DSH_HOME/state/agents-notch/settings.json, written by the pane, one click at a time.

Both doors are clamped by the same rules, so a slider and a YAML line behave identically. Reset in the pane clears the third layer and the row decides again. The pane keeps its own file because a browser cannot safely rewrite YAML that other sessions also edit.

- id: agents-notch
  config:
    contextBudget: 1000000     # your route's context window, in tokens
    anchor: top-right
    scale: 1.25

Honest numbers

contextBudget is not guessed. The context window belongs to the model route, and nothing in the session feed carries it, so this plugin defaults it to null — and with null you get a token count and no percentage, no bar and no amber. A percentage against an invented denominator is a lie that looks like information, which is worse than a number with units.

Set it to your route's real window (this build's DeepSeek V4 routes: 1000000) and the percentage and the bar appear.

What earns a row

A session is on the board because something happened to it: it is working, it is blocked on an approval or a question, it failed, or it finished and you have not closed it out. Merely being open never earns a row, however many sessions are attached.

Finished and failed rows do not expire on a timer. They leave when the harness's own close-out verdict says so — the ✓ that the session-finished plugin puts in the sidebar, read over that plugin's HTTP route, or the ✕ on the row. If that plugin is not installed, this one notices after three failed probes and retires settled rows after 15 minutes instead, and says so in its report (host-report.jsonl).

When the host stops answering, the board stops pretending — the tab goes grey, the bot falls asleep, and the sub line dates the last heartbeat instead of repeating a summary nobody is updating:

Limits, stated plainly

• Windows only, x64. No macOS or Linux build, and no partial one.
• No DSH version is declared in the manifest, so nothing gates a wrong install. It was built and tested on 0.2.1-rc.2; if a field is missing on your build, the host keeps serving and the log says what failed rather than the tab lying.
• Open needs the app's own window. It switches sessions through the plugin's in-app half, so the app has to be running; the notch can bring its window back from the taskbar or the tray, but it cannot start the app.
• session-finished is optional but recommended — without it, closed-out sessions linger for the 15-minute fallback.
• The window is not draggable, by design: it is a fixed surface at the top of the screen, and a draggable one got dragged by accident. Move it with anchor and screen.
• Two windows cannot coexist — a named mutex makes the second instance exit.
• The binary is unsigned, so SmartScreen warns the first time you run it.
• Quitting it from the tray is a one-hour dismissal, not forever: the host brings the notch back, because a status board that can be lost by accident is worse than one that returns.

Uninstall

dsh plugin --profile web remove dsh-agents-notch
Remove-Item -Recurse "$env:DSH_HOME\state\agents-notch"    # state, logs, window binary, unpack cache

Develop

npm test                      # 65 tests, node --test, no harness, no window, no network
npm run window:build          # dotnet build desktop/AgentsNotch.csproj -c Release
npm run window:publish        # self-contained single file + SHA256 into dist/win-x64

# a still of the board, from a fixture, without a harness:
desktop/bin/Release/net9.0-windows/AgentsNotch.exe --state desktop/fixtures/working.json --open --shot dist/shots/working.png

The window takes --shot, --record, --open, --freeze, --face <name>, --island x1|x4|d1, --log, --fps, --no-effects and --probe-rect, and desktop/fixtures/ holds schema-4 state files, so every state, face and alert can be photographed with no harness running. Every picture in this README is drawn by the window itself: python tools/readme-media.py shots|record|art renders the stills, records the demo frame by frame on the window's own clock, and lays them out.

Installing the window by hand (offline, or a build of your own): autoDownload: false in the plugin row turns the download off, downloadUrl: <url> points it at a mirror, and tools/install-window.ps1 -Url <release asset> or -FromPath dist\win-x64 puts a window where the host looks for one.

• docs/CONTRACT.md — the interface between the two halves; frozen, and both halves and the tests are written against it.
• docs/INTERNALS.md — the engineering record: every measurement that decided a shape, and the traps that cost a day each. The most useful file here if you change something.
• CHANGELOG.md — what changed, per version.
• docs/PUBLISHING.md — the checklist for cutting a release.

中文

Agents Notch 是一个 DeepSeek Harness 插件：在屏幕顶部挂一个始终置顶的“刘海”，每个会话一个小机器人，一眼就能看出 哪个会话正在等你。

• 工作中是缓慢转动的蓝色弧线，正在调用工具时标签底边会有光流过；需要你是琥珀色光圈；完成是绿色光圈和 ^^ 表情；失败是红色光圈和 x x 表情。
• 有会话需要你、失败或完成时，标签会短暂展开成提示，显示原因和 Open 按钮——一键切换到该会话，即使应用最小化或在托盘里。
• 鼠标悬停即展开面板：最新变化的会话在顶部（标题、项目、上下文用量、正在运行的工具或等待的问题），其余会话列在下方，超出时可滚动。单击一行在大机器人上查看，双击或 Open ↗ 切换到该会话。
• 机器人有十六种表情：思考、专注、疲惫、困惑、恳求、完成、睡着……
• 从不抢焦点，全屏应用下自动隐藏；没有真实的上下文预算就不显示百分比，宿主断开时标签变灰并注明最后心跳时间。
• 设置 → Agents Notch 有独立设置页：大小、位置、显示器、行数、不透明度、动效，修改即时生效。

dsh plugin --profile web add dsh-agents-notch

仅支持 Windows 10/11 x64。插件本体约 30 KB，首次运行时会从对应版本的 GitHub Release 自动下载窗口程序并校验 SHA256，无需安装 .NET 运行时。