dsh-mcp-manager

dsh-mcp-manager

English · 中文

MCP server manager for DeepSeek Harness. Add, edit, enable and test Model Context Protocol servers from the Web settings page or from agent tools — connected and disconnected at runtime, with no DSH restart.

@zhengjunyao/dsh-mcp-manager · MIT · requires DSH >= 0.1.5-rc.1 · Node ^22.19.0 || >=24.0.0

---

What it is for

An MCP server normally has to be wired into the harness composition to be loaded, so changing one means restarting the host. This plugin turns "which MCP servers exist" into an ordinary JSON file and makes it live:

• a settings card to add / edit / enable / test / remove a server;
• mcp_manager_* agent tools that do the same thing;
• the server's tools appear in the session as mcp__<serverName>__<toolName>;
• disabling or removing a server unregisters its tools immediately.

Two transports: stdio (a local child process: command / args / env / cwd) and Streamable HTTP (a remote URL: url / headers).

Getting started

No restart is needed at any point. Adding the plugin to a profile makes the host reload its plugin tree by itself (dsh.profile.patchReload is unset here, which means live reload); you only need to refresh the browser page to see the panel.

1. Install the plugin — run:

   dsh plugin --profile web add @zhengjunyao/dsh-mcp-manager
   # from a checkout: dsh plugin --profile web add link:/path/to/dsh-mcp-manager
   

   Expected: the command ends with a line reading + @zhengjunyao/dsh-mcp-manager, and the profile's dependencies and load list both contain it.

2. Open the “MCP 管理” card — refresh the Web GUI, open Settings in the left sidebar, and find the MCP 管理 card.

   Expected: the card shows a master switch, the server list, and a phase badge per server (active / starting / waiting / error / stopped).

📷 【Screenshot 2】Starting point: where the “MCP 管理” card lives and what it looks like How to capture: refresh the Web GUI → Settings in the left sidebar → scroll to the “MCP 管理” card → stop with the whole card visible (title + master switch + server list in one frame) Redaction: if servers already exist, blur server names and any local paths in commands Replace: swap this whole block for ![MCP manager settings card](image-url)

3. Add a server — click Add in the card, give it a name (it becomes the tool prefix mcp__<name>__), pick a transport (stdio → command, Streamable HTTP → URL), and save.

   Expected: the server appears immediately and its badge moves from starting to active; on failure it stays at error with the reason shown next to it.

📷 【Screenshot 3】Key action: the add form and which fields matter How to capture: click “Add” → fill the form (name + transport + command/URL) → stop before saving Redaction: blur local paths, domains and tokens in the command or URL Replace: swap this whole block for ![Adding an MCP server](image-url)

4. Confirm the tools really registered — look at the server's tool count and expand its tool names, or simply ask the agent to call mcp_manager_list.

   Expected: tool count > 0, names shaped like mcp__<name>__<tool>, and those tools are callable by the agent right away.

📷 【Screenshot 4】The step people get stuck on: proof that it connected and registered tools How to capture: server in active → expand its tool names → stop with badge, tool count and several mcp__…__… names visible at once Redaction: tool names are usually fine; blur server names and paths if they carry personal data Replace: swap this whole block for ![Server connected with tools registered](image-url)

5. Probe it once (optional but recommended) — click Test on that server, or have the agent call mcp_manager_test; you can also test a draft that is never written to disk.

   Expected: a success message, or a failure that names the cause (command not found / port closed / auth failed), so you can fix it directly.

📷 【Screenshot 5】End state: one server going from config to usable How to capture: stop at the success message after a test (or at the mcp_manager_list result on the agent side) Redaction: none (blur any URL or token) Replace: swap this whole block for ![Test connection succeeded](image-url)

Usage

Web GUI → Settings → MCP 管理 (MCP manager). The card shows each server's live phase (● connected / ◌ no tools / ✖ failed / ○ not loaded), its tool count and its tool names, and offers a test button that really connects — a draft is tried and thrown away, so a typo is caught before it is saved.

Agent tools: mcp_manager_status, mcp_manager_list, mcp_manager_add, mcp_manager_update, mcp_manager_remove (previews unless confirm: true), mcp_manager_test, mcp_manager_import, mcp_manager_reload.

Configuration

$DSH_HOME/dsh-mcp-manager.json (default ~/.dsh/dsh-mcp-manager.json, mode 0600). It honours DSH_HOME, so a relocated home reads the relocated file. Hand edits are fine — press "reload config" afterwards.

{
  "version": 1,
  "config": { "enabled": true, "announceToAgent": true },
  "servers": [
    {
      "name": "garmin",
      "transport": "stdio",
      "enabled": true,
      "command": "/opt/homebrew/bin/uvx",
      "args": ["garmin-mcp"],
      "env": {}, "cwd": "",
      "url": "", "headers": {},
      "toolCallTimeoutMs": 60000,
      "reconnect": {}
    }
  ]
}

name becomes the tool namespace: the example above publishes mcp__garmin__<tool>. It must match [A-Za-z0-9_-]{1,32}, the same constraint the harness bridge enforces.

Two switches

Switch	Where	When off
installation	the profile bundle row (cordis.patch.yml)	nothing mounts: no tools, no panel
runtime	the config file / the panel's "disable" button	every MCP server disconnects and every mcp__* tool unregisters; the panel and mcp_manager_* stay, so it can be switched back on

Design: why it does not implement MCP itself

The plugin does not reimplement the protocol. It drives the harness's own bridge, @deepseek-ai/dsh-mcp-client: one instance per enabled server, disposed to disconnect. That bridge owns the stdio / Streamable HTTP transports, credential scrubbing, reconnect backoff, resource publishing and the mcp__<serverName>__<toolName> naming contract. This plugin only decides which instance should exist.

Resolution is a ladder (src/core-mcp.ts) that prefers the running harness's own copy of the bridge and only falls back to the plugin's dependency tree — version skew is the classic failure of a plugin that bundles its own client.

Why it never calls tools.restrict()

The npm package this replaces (@wingsky-1/dsh-mcp-manager) reconciled tool visibility by calling the core tools.restrict() once per tool name. Every such call rebuilds the entire registry view with fresh Maps and Sets, so the loop cost O(tools × names²) on the host's event loop — measured at 94.7% CPU, an 8-second unresponsive port and a 1080 MB heap.

This plugin calls restrict() nowhere: connecting registers tools, disconnecting unregisters them, which is the bridge's own contract. Its single registry read is one ctx.tools.schemas() per observation, grouped in memory by prefix — linear, and paid only when a panel or a status tool actually looks.

Verification

npm run typecheck
npm test                 # 54 unit tests
npm run verify:live      # real instance, end to end
npm run verify:full      # portability gate (isolated DSH_HOME, tarball install)

verify:live boots an isolated DSH instance (its own DSH_HOME; your install is untouched) and runs tests/fixtures/echo-mcp-server.mjs — a dependency-free MCP server written for the check, so a shared broken dependency cannot make both sides agree on a wrong wire format. It then asserts that the seeded server becomes active with tools named mcp__echo__*, that adding a second server over HTTP publishes its tools, that disabling it unregisters them, that removing it drops the definition, that a draft probe reports tools without being persisted, and that the master switch drains and restores.

Compatibility

• DSH >= 0.1.5-rc.1 (verified on 0.1.7-rc.2).
• Requires the harness-provided @deepseek-ai/dsh-mcp-client. If it is missing the plugin still boots; the panel and /probe report bridgeError instead of taking the host down.
• macOS / Linux / Windows (stdio uses an absolute command; on Windows remember the .cmd suffix). Since this version the peerDependencies range explicitly declares compatibility with DSH 0.2.0-rc.2 (^0.2.0-rc.2 is now included), so no compatibility warning appears on 0.2.0-rc.2. No functional change.

License

MIT