플러그인

DSH 설정 페이지에 「用量」 섹션을 추가하여 MiniMax Token Plan 사용량(5시간 및 주간 윈도우 리셋 카운트다운), 모델별 내역, 비디오 보너스 크레딧을 표시합니다. API 키를 보유한 신뢰할 수 있는 플러그인을 통해 `/v1/token_plan/remains`를 가져오며, 키가 설정되지 않은 경우 자동으로 숨겨집니다. MIT.

DeepSeek Harness 작업 완료 후 Windows를 자동 종료한다. 떠 있는 arm 버튼과 취소 가능한 카운트다운 배너(shutdown /a)를 제공하며, 런타임 의존성은 없다.

Web UI용 MiniMax 토큰 플랜 할당량 독: 대화 입력 영역에 5시간 사용률 % 칩을 표시하고, 클릭하면 모든 모델의 5h/주간 사용량과 재설정 카운트다운 상세 패널, 활성 기본 모델이 MiniMax가 아니면 자동 숨김.

Floating pill for DeepSeek Harness that shows OpenCode Go usage for the 5-hour, weekly and monthly windows as three rings, optionally alongside the DeepSeek account balance; a hover popover lists each window with its reset countdown, and a minimal mode nests the rings. Settings cover refresh interval, progress basis, what the pill shows and its position.

Full-page OpenCode Go usage view in the DSH Web UI opened from the sidebar: official 5-hour, weekly and monthly used-percent rings, reset countdowns, a local pacing forecast and a 7-day sampling trail, with multiple API-key accounts you can switch between. Add your key as OPENCODE_GO_API_KEY in DSH credentials first.

Session cost in rubles in the composer dock — the tariff in effect with its countdown, the API cost at that tariff, the CBR rate, the total including subagents, cache savings, and DeepSeek Platform balances.

DSH 사이드바 설정 위에 Command Code 플랜 쿼터를 표시합니다: 5시간·주간·월간 창을 사용률과 리셋 카운트다운으로 보여주고, /quota 명령과 무의존성 CLI를 제공합니다. 키를 자체 제공자 라우트에서 읽으므로 설정이 필요 없고 다른 플러그인도 필요 없습니다.

Peak and off-peak billing season in the composer statistics row, right after the cache-hit reading, with a coloured dot, a countdown to the next switch, and a panel that shows the account balance split into total, granted and topped up in the currency the API reports.

Shows DeepSeek peak/off-peak pricing status, a countdown to the next rate change, and the estimated session cost as inline text beside the model selector.

Peak/off-peak billing cost dial for the DSH Web GUI: session token usage billed at the official DeepSeek peak and off-peak rates, a rate dial with a model-colored needle and switch countdown, a balance ring with a low-balance alarm, drag-to-resize, and a minimized status-lamp mode.

Inline Command Code plan usage badge in the DSH composer toolbar beside the model selector: 5h and weekly window usage plus remaining credits, clicking the badge opens an upward detail popover with reset countdowns; reuses the commandcode/report remote from @mars-sea/dsh-commandcode-provider.

DSH web GUI의 헤더 칩으로, 현재 베이징 시간이 DeepSeek API 피크 시간대인지 표시하고 실시간 시계와 다음 전환까지의 카운트다운을 제공합니다.

DSH 설정 페이지에 "用量" 섹션을 추가해 MiniMax Token Plan 사용량(5시간 및 주간 창과 초기화 카운트다운), 모델별 내역, 동영상 보너스 크레딧을 보여 줍니다. API 키를 보유한 신뢰 플러그인을 통해 `/v1/token_plan/remains`를 가져오며, 키가 설정되지 않으면 자동으로 숨겨집니다. MIT.

峰谷倒计时：模型名称中的时段与倒计时，附实时状态、显示预览和计费说明。

Restart initiated by the agent itself, not by a button. The agent calls one tool, then the plugin takes over: it waits until every agent and background job on the host is idle, runs a visible ten-second countdown that a click, a scroll, or a key press cancels, then restarts DSH and wakes the original session so the agent carries on from its last sentence. No button, no manual entry: the tool is the only way in. Works on the official desktop app and the official web client; third-party shells are not supported out of the box. Windows only.

A composer-dock wallet pill for DeepSeek Harness that shows the account balance behind DEEPSEEK_API_KEY and opens a panel with the peak/off-peak billing window, a live switch countdown, and per-model token prices.

DeepSeek balance chip in the sidebar name row, showing the balance, the current peak or off-peak window, and a countdown to the next switch; click to refresh.

Restart initiated by the agent itself, not by a button. The agent calls one tool, then the plugin takes over: it waits until every agent and background job on the host is idle, runs a visible ten-second countdown that a click, a scroll, or a key press cancels, then restarts DSH and wakes the original session so the agent carries on from its last sentence. No button, no manual entry: the tool is the only way in. Works on the official desktop app and the official web client; third-party shells are not supported out of the box. Windows only.

Outbound route pool for DeepSeek Harness. Ships 15 seed routes plus a 20-entry candidate pool covering 7 target kinds (GitHub raw/codeload/main, npm registry, PyPI index, HuggingFace, general). Routes are verified before use: upstream IP lists go through a TLS handshake with full certificate-chain validation (a bare TCP check can be answered locally and report dead IPs as healthy), and failures advance a cooldown ladder of 2/5/15 minutes with the fastest healthy route picked per target kind. Routes are applied by rewriting the URL with one of four rules (prefix, registry, index, host-replace), reaching git, pip, npm, pnpm, gh, curl and wget through three paths: the shell seam (download commands the model runs through the bash tool are intercepted and rewritten automatically; commands wrapped by the pwsh tool, and fetches made by the host itself or the renderer, are not covered), two registered tools the model can call directly (line_pool_status, line_pool_run), and child-process spawn. Multi-line commands keep their line breaks and only the download segment is touched. URLs carrying credentials (user:token@host) are never rewritten, so tokens are not forwarded to third-party mirrors. No global config is modified. A sidebar panel lists every route with latency, failure reason and cooldown countdown, supports per-route retest and enable/disable, and shows live TUN/proxy status from network-adapter and loopback port checks. The candidate pool is re-verified every 24 hours so newly usable routes are added and dead ones dropped. 570 tests, 87% line coverage.

Windows-only: adds a switch to Settings → General that powers the computer off when the finished conversation ends (default delay 60 s, configurable 5–86400 s), behind a native countdown dialog that cancels the pending shutdown in one click (shutdown /a).

Floating overlay in the Harness Web UI with OpenCode Go usage: 5-hour rolling, weekly and monthly percentages, reset countdowns and the renewal date, with device-code sign-in and silent token refresh.

Peak-hour reminder: while DeepSeek charges peak rates it shows a banner at the top of the DSH Web UI every N minutes (default 5, range 1-120), adds one at each peak/valley switch, stays silent during valley hours, and keeps a sidebar row with the current state and a countdown to the next switch. Peak rules (Beijing time Mon-Fri 09:00-12:00 and 14:00-18:00; weekends, Chinese public holidays and 调休 weekends are valley all day) are evaluated in the host and served over two no-auth routes, /plugins/dsh-peak-reminder/state and /config; settings live in settings.section and are stored in ~/.dsh/peak-reminder.json.

Runs a chosen power action (shutdown / restart / hibernate / sleep / lock / logoff) once every Agent session and background job has gone idle: the plugin samples in-process sessions once per second, counts running sessions as always busy, checks running background jobs through a configurable option (considerJobs, on by default, shown with its live count in Settings), waits a confirm window and then a cancellable countdown, and shows a draggable bottom-right card with the current phase and remaining seconds; the enable toggle never survives a host restart, any newly started session or Cancel aborts the countdown, and if the agents service is unavailable the machine is treated as busy so nothing ever fires. Windows only (the built-in shutdown / rundll32 actions); every action except none degrades to none elsewhere.

DeepSeek API billing-period chip in the composer dock: shows whether the current time is peak or off-peak with a countdown to the next rate switch, opens the peak/off-peak window rules on click, and during peak hours intercepts sending to ask for confirmation first.