플러그인
DeepSeek-Harness 플러그인을 찾아보고, 필터링하고, 설치하세요.
플러그인 52개 찾음
dsh-opencode-go-router
tlewa/dsh-opencode-go-router
Keeps prompt caches warm for OpenCode Go DeepSeek conversations by predicting each request's cache hit before it is sent, rotating the x-opencode-session routing id when that request would be cold and recent requests are slow, and pooling idle warm ids for reuse by new conversations.
dsh-ocg-session-head
verneuil/dsh-ocg-session-head
Injects a per-conversation x-opencode-session header for OpenCode Go routes that were registered under a custom provider name, through the host official llm-pi-ai/request-headers waterfall. Zero dependencies, no fetch patching, and it never overwrites a header someone else already set.
dsh-opencode-go-panel
wiselfx/dsh-opencode-go-panel
DeepSeek Harness 사이드바에 OpenCode Go 구독, 모델 허용량, 사용량 측정기, 토큰 100만 개당 요금 패널을 추가합니다.
dsh-opencode-usage-dashboard
zhxmt-xm/dsh-opencode-usage-dashboard
OpenCode 사용량 대시보드입니다. DeepSeek Harness 사이드바 패널에서 할당량과 사용량을 확인합니다. Go 구독 기간, Console 지출, 추세, 예측, 모델별 내역, 여러 계정, 서비스 계정 필터링을 지원하며 영어/중국어 UI를 제공합니다.
dsh-opencode-go-usage
moondrop12138/dsh-opencode-go-usage
DSH Web UI sidebar에서 여는 전체 페이지 OpenCode Go 사용량 화면입니다. 공식 5시간/주간/월간 사용률 ring, 초기화 countdown, 로컬 속도 예측, 7일 sampling 기록을 표시하고 여러 API key 계정 사이를 전환합니다. 먼저 DSH credentials에 `OPENCODE_GO_API_KEY`를 추가하세요.
dsh-llm-opencode-go
a2580vb/dsh-llm-opencode-go
DeepSeek Harness 모델 목록에 OpenCode Go를 추가해 구독 쿼터 표시, 모델 검색, 세션 고정 등을 제공합니다.
dsh-gateway-models
itchenshi/dsh-gateway-models
OpenCode Go 및 Command Code의 route wire protocol/endpoint를 선언해 API 주소를 직접 입력할 필요가 없습니다. OpenCode Go 경로에 DeepSeek V4.1 모델을 추가해 맨 앞에 배치하고 공개 카탈로그로 Command Code 모델 목록을 완성합니다. OpenCode 요청마다 대화별 `x-opencode-session` header를 붙여 400 MissingSessionID를 해결합니다.
dsh-opencode-go-usage
ziouf/dsh-opencode-go-usage
DeepSeek Harness용 OpenCode Go 플랜 사용량 모니터: 채팅 입력창 아래 상태 바에 실시간 5시간 롤링 / 주간 / 월간 쿼터 표시
dsh-opencode-go-pool
whitelonng/dsh-opencode-go-pool
DeepSeek Harness 플러그인: OpenCode Go 플랜을 위한 다중 키 풀. 할당량 초과 시 자동 페일오버와 사용량 대시보드를 제공합니다.
dsh-opencode-go-quota
zer0zio-stack/dsh-opencode-go-quota
DSH 웹 UI용 오른쪽 아래 余额 배지: 펼치면 현재 선택된 제공자의 OpenCode Go 플랜 한도 또는 DeepSeek 선불 잔액을 가져오고, 로컬 토큰 사용량과 가격 기반 지출 추정치를 함께 보여 줍니다.
dsh-opencode-go-session
sw503544488/dsh-opencode-go-session
Sends a stable per-conversation x-opencode-session header on every pi-ai call to OpenCode through the harness header hook, so routing and prompt caching stay per conversation. Its HTTP routes have no DSH access check, so a web page open in your browser could call them.
dsh-opencode-go-usage
daydream-wjh/dsh-opencode-go-usage
OpenCode Go quota readout pinned above the composer in the DSH web GUI: rolling, weekly and monthly used percentages with progress bars, and reset countdowns that keep ticking without a network read. Expanding adds each window's reported status and reset time. The Host half reads the gateway usage endpoint with a key from the credentials store — OPENCODE_API_KEY, falling back to the older OPENCODE_GO_API_KEY — while the browser only reads a same-origin route, so the key never reaches the page. A settings page (Settings → OpenCode Go) stores that key in the credentials store and reports only whether it is configured, its source and a masked preview, so entering a key no longer means editing the credentials file by hand.
dsh-opencode-go-usage
knight02-bit/dsh-opencode-go-usage
OpenCode Go allowance bar under the DSH input box: the rolling, weekly and monthly percentages still left, plus a popover pace budget that turns each window into a per-day and per-week spend target and marks whether the current burn is ahead of that target or behind.
dsh-opencode-go-usage
jfreey/dsh-opencode-go-usage
Shows OpenCode Go usage (5-hour, weekly, monthly) in the DSH composer dock and a Settings page.
dsh-opencodego-usage
jamolpe88/dsh-opencodego-usage
OpenCode Go subscription usage in the DeepSeek Harness composer: 5-hour, weekly and monthly windows with a click-open details panel. Zero configuration.
dsh-subscribe-meter (dsh-opencode-go-meter)
ycm50/dsh-subscribe-meter
Session cost meter forked from dsh-cost-meter, retargeted at OpenCode Go: per-session and per-day cost, a 90+ model price catalog with automatic matching, OpenCode Go subscription usage as rolling 5-hour / weekly / monthly percentages with progress bars, Coding Plan quotas, provider balances, peak/off-peak pricing notices, bilingual UI. It provides service:cost-meter like Han-1413141/dsh-cost-meter and the other dsh-subscribe-meter variants, so install only one cost meter: it replaces dsh-cost-meter rather than running alongside it.
dsh-plugin-opencode-go-usage
keyblues/dsh-plugin-opencode-go-usage
OpenCode Go subscription usage beside the composer: the rolling 5-hour, weekly and monthly windows each as a small ring with the used percentage (amber at 70%, red at 90%). Clicking the meter opens a detail card with per-window progress bars, reset countdowns and a refresh button, and when it is not clicked nothing floats over the conversation. The API key stays in the Host process and never reaches the browser.
dsh-opencode-go-quota-settings
zztdandan/dsh-opencode-go-quota-settings
DSH 설정 페이지에서 OpenCode GO 롤링 5시간/주/월 할당량을 표시합니다. 동일 출처 프록시로 공식 사용량 API를 읽으며 사이드바 위젯은 등록하지 않습니다. Astervolans/dsh-opencode-go-usage(yumusb/dsh-opencode-go-usage의 포크)를 재작업한 플러그인입니다. 먼저 기존 플러그인을 제거해야 합니다. 둘 다 자체 OpenCode GO 설정 섹션을 등록하므로 함께 설치할 수 없습니다.
dsh-opencode-go-auth
solstice621/dsh-opencode-go-auth
OpenCode Go 구독을 DSH Desktop에 연결합니다. API 키 관리, 사용량 스냅샷, 자동 모델 동기화, 모델 선택을 지원합니다.
dsh-opencode-go-second
yfwu2020/dsh-opencode-go-second
OpenCode Go에 대한 독립 연결을 추가합니다. 자격 증명 설정, 수동 모델 검색, 대화별 세션 헤더를 제공합니다.
dsh-opencode-go-quota
wihteco/dsh-opencode-go-quota
OpenCode Go 할당량을 작업 공간 목록 아래 사이드바 하단에 표시합니다. 가장 제한적인 시간 창은 한 칸에 나타내고, 마우스를 올리면 롤링 5시간/주간/월간 비율, 각각의 사용량 막대, 경과 시간 표시, 남은 비율, 초기화 카운트다운을 보여줍니다. DSH 자격 증명 저장소에 이미 있는 키로 OpenCode 공식 사용량 API에서 60초마다 갱신합니다.
dsh-opencode-go
dan-ai-studio/dsh-opencode-go
DeepSeek Harness용 OpenCode Go 모델 provider 및 설정 UI입니다.
dsh-opencode-go-path
itchenshi/dsh-opencode-go-path
opencode-go 경로의 wire protocol을 선언해 설치된 카탈로그에 설명이 없는 모델도 해석 가능하게 합니다. 빠진 경우 DeepSeek V4.1 모델을 경로에 추가하고 OpenCode 요청에 대화별 x-opencode-session 헤더를 붙입니다.
dsh-model-surplus
itchenshi/dsh-model-surplus
세션 헤더에 활성 모델의 사용량과 잔액을 표시합니다. OpenCode Go 플랜은 선택 모델의 월간 한도와 함께 롤링·주간·월간 사용량을, Command Code는 5시간·주간 사용량과 남은 크레딧을 보여 줍니다. DeepSeek 계정 잔액도 표시합니다.