플러그인
DeepSeek-Harness 플러그인을 찾아보고, 필터링하고, 설치하세요.
플러그인 18개 찾음
dsh-opencode-go-usage
v587d/dsh-opencode-go-usage
컴포저 독에 표시되는 OpenCode Go 구독 사용량(롤링/주간/월간 윈도우와 리셋 카운트다운) 및 내장 자격 증명 편집기
dsh-ocgo-lite
ok-wx/dsh-ocgo-lite
컴포저 독의 OpenCode Go 사용량 바: 롤링/주간/월간 할당량 링, 공식 실시간 요금으로 계산된 DSH 세션 토큰 및 비용 통계, 모델별 및 현재 세션 범위별 내역을 세션마다 실시간으로 업데이트, API 키 원클릭 복사.
dsh-opencode-go-usage-badge
panther-w/dsh-opencode-go-usage-badge
OpenCode Go 할당량(5시간·주간·월간)을 사이드바 한 줄 배지로 표시하며 해당 모델 소스를 선택하면 DeepSeek 공식 잔액으로 전환합니다. 읽기 전용이며 텔레메트리는 없습니다. OpenCode Go는 DSH에 OPENCODE_GO_API_KEY를 설정하거나 OpenCode Console에 로그인해야 합니다(후자는 로컬 자격 증명 파일을 대체 수단으로 읽음). DeepSeek 잔액에는 DSH의 DEEPSEEK_API_KEY가 필요합니다.
dsh-opencode-go-usage
wawo77/dsh-opencode-go-usage
DSH 웹 GUI용 플랜 사용량 펫: 떠 있는 스켈레톤 애니메이션 캐릭터가 말풍선으로 할당량을 알리고, 설정된 프로바이더(OpenCode Go, Command Code, DeepSeek)를 자동으로 매칭해 플랜 비율 또는 계정 잔액을 보여주며, 프로바이더 API를 사용할 수 없을 때는 로컬 토큰 통계로 폴백합니다. 드래그 가능, 휠 확대/축소(90-260px), 합성 클릭 사운드, 루프백 전용 라우트.
dsh-opencode-go-usage
hjay1101/dsh-opencode-go-usage
Settings 사이드바 섹션과 작성창의 번개 버튼에 OpenCode Go 사용량을 표시합니다. 5시간 롤링, 주간·월간 기간별 진행률 막대와 초기화 시각, DeepSeek 공식 모델 잔액(마우스 오버), 공식 데이터에 따라 실시간 갱신되는 모델 목록과 한도를 제공합니다.
dsh-opencode-go-usage
astervolans/dsh-opencode-go-usage
OpenCode GO 할당량 위젯을 사이드바에 고정합니다. rolling/weekly/monthly 사용량 막대와 각 기간의 경과/잔여 시간, same-origin 사용량 프록시, /opencode-go 명령, GO 게이트웨이 채팅 요청용 런타임 x-opencode-session 수정을 제공합니다. yumusb/dsh-opencode-go-usage의 포크입니다.
dsh-opencode-go-usage
xenia0922/dsh-opencode-go-usage
DeepSeek Harness 플러그인: OpenCode Go의 사용량과 비용을 보여주는 플로팅 대시보드입니다(할당량, 요청별 비용, 모델/출처 분포).
dsh-opencode-go-usage
verneuil/dsh-opencode-go-usage
DeepSeek Harness floating pill에 OpenCode Go의 5시간/주간/월간 사용량을 ring 3개로 표시하고 남은 model quota를 자동 계산합니다. DeepSeek 계정 잔액도 함께 표시 가능. 최소 모드에서는 ring을 겹쳐 5시간/주간/월간 값을 바깥/중간/안쪽에 각각 고르고 실시간 미리보기를 제공합니다.
dsh-opencode-go-usage
xueayi/dsh-opencode-go-usage
DeepSeek Harness용 OpenCode Go 플랜 사용량 모니터: 플로팅 웹 독에서 실시간 5시간 롤링/주간/월간 쿼터를 제공합니다.
dsh-opencode-go-usage
moondrop12138/dsh-opencode-go-usage
DSH Web UI sidebar에서 여는 전체 페이지 OpenCode Go 사용량 화면입니다. 공식 5시간/주간/월간 사용률 ring, 초기화 countdown, 로컬 속도 예측, 7일 sampling 기록을 표시하고 여러 API key 계정 사이를 전환합니다. 먼저 DSH credentials에 `OPENCODE_GO_API_KEY`를 추가하세요.
dsh-opencode-go-usage
ziouf/dsh-opencode-go-usage
DeepSeek Harness용 OpenCode Go 플랜 사용량 모니터: 채팅 입력창 아래 상태 바에 실시간 5시간 롤링 / 주간 / 월간 쿼터 표시
dsh-opencode-go-usage
daydream-wjh/dsh-opencode-go-usage
OpenCode Go quota readout pinned above the composer in the DSH web GUI: rolling, weekly and monthly used percentages with progress bars, and reset countdowns that keep ticking without a network read. Expanding adds each window's reported status and reset time. The Host half reads the gateway usage endpoint with a key from the credentials store — OPENCODE_API_KEY, falling back to the older OPENCODE_GO_API_KEY — while the browser only reads a same-origin route, so the key never reaches the page. A settings page (Settings → OpenCode Go) stores that key in the credentials store and reports only whether it is configured, its source and a masked preview, so entering a key no longer means editing the credentials file by hand.
dsh-opencode-go-usage
knight02-bit/dsh-opencode-go-usage
OpenCode Go allowance bar under the DSH input box: the rolling, weekly and monthly percentages still left, plus a popover pace budget that turns each window into a per-day and per-week spend target and marks whether the current burn is ahead of that target or behind.
dsh-opencode-go-usage
jfreey/dsh-opencode-go-usage
Shows OpenCode Go usage (5-hour, weekly, monthly) in the DSH composer dock and a Settings page.
dsh-plugin-opencode-go-usage
keyblues/dsh-plugin-opencode-go-usage
OpenCode Go subscription usage beside the composer: the rolling 5-hour, weekly and monthly windows each as a small ring with the used percentage (amber at 70%, red at 90%). Clicking the meter opens a detail card with per-window progress bars, reset countdowns and a refresh button, and when it is not clicked nothing floats over the conversation. The API key stays in the Host process and never reaches the browser.
dsh-opencode-go-quota-settings
zztdandan/dsh-opencode-go-quota-settings
DSH 설정 페이지에서 OpenCode GO 롤링 5시간/주/월 할당량을 표시합니다. 동일 출처 프록시로 공식 사용량 API를 읽으며 사이드바 위젯은 등록하지 않습니다. Astervolans/dsh-opencode-go-usage(yumusb/dsh-opencode-go-usage의 포크)를 재작업한 플러그인입니다. 먼저 기존 플러그인을 제거해야 합니다. 둘 다 자체 OpenCode GO 설정 섹션을 등록하므로 함께 설치할 수 없습니다.
dsh-opencode-go-usage
xiaweiliang060035/dsh-opencode-go-usage
모든 API 키의 OpenCode Go 구독 사용량(롤링/주간/월간)을 실시간으로 보여주는 플로팅 위젯으로, 속도 제한 알림과 자동 키 풀 검색 기능을 제공합니다.
dsh-opencode-go-usage
ltctfer/dsh-opencode-go-usage
OpenCode Go 요금제 사용량 조회 플러그인: opencode_usage 도구가 opencode.ai 공식 사용량 API를 실시간 조회(롤링 5시간/주간/월간 세 윈도우의 사용률과 리셋 시간), API 키는 opencode 인증 파일/환경 변수/플러그인 설정에서 자동 파싱, 별도 로그인 불필요