Plugins

Project-based task manager: a sidebar panel, ten chat tools, and one-click splitting of an assistant reply into tasks.

Four filter chips on their own row at the foot of the sidebar: running sessions, sessions waiting for your approval, plan review or answer, sessions with something unread (a turn that finished unseen, or newer activity the panel was not opened on), and sessions updated since local midnight. Each chip counts its matches and opens a popover listing them grouped by workspace, where a row opens the session. The row ends with a DeepSeek service status dot (green operational, yellow partial degradation, red open incident, grey when the feed is unreachable) that subscribes to the status Atom feed once a minute with an ETag conditional request and shows the current finding, the last refresh time and the three newest incidents on hover; clicking it opens status.deepseek.com. A separate panel adds an all-sessions chip, a more menu for the last day, three days, week or thirty days, and a manage mode that searches sessions by title or path, multi-selects them, lists the Markdown digests it has written to the session-digests folder of the DSH data directory in a resizable right-hand column that previews them in place or full screen, writes a Markdown digest and only then moves the session directories to the sessions/.trash folder of that directory; the session you have open cannot be selected.

App Updater for DeepSeek Harness: detect every installed app that has a newer version and update it with one click by downloading the vendor's full installer from its official website and installing it silently — without launching the app. Windows (winget

Drives a plugin page in the running DeepSeek Harness UI — opens the panel, reads real DOM and computed styles, clicks, types, waits for async effects, collects console errors, then returns to the original conversation.

Prompt booster for the composer. Left-click the composer button and the draft is lightly polished and replaced in place (undoable, no popup). Right-click opens a menu with 8 built-in modes plus your own, where each mode's template can be edited or new modes added (saved on the host), and the model used for the rewrite is picked from the live dsh model list. Other modes show a before/after preview. Based on rongxingda/dsh-prompt-enhance (Apache-2.0); do not install both — both add a composer button and share Ctrl+Alt+E, so disable one of them if the upstream is present.

Shows the DeepSeek API-key balance as one ambient stat in the Harness composer row, refreshed every 60 seconds. Click the balance to set a local low-balance threshold; the amount turns red below it. The API key stays in the host and is only sent to api.deepseek.com/user/balance.

余额显示quota-balance — shows the DeepSeek account balance at the left of the composer status row; clicking it opens a panel with the normal and bonus wallet split, the refresh time and a top-up link. The chip and panel read the host surface tokens, so they follow the dsh-plugin-wallpaper-engine glass settings, theme and wallpaper changes.

Renders the seven-layer SQLite store of meow-memory as a live 3D star map, with draggable nodes, layer rings and a click-through detail panel. Requires the meow-memory plugin and Node 22.5+.

Fold the sidebar plugin-panel list to three entries, drag them to reorder, and keep every other panel one click away in a More menu — order and pins persist in localStorage.

Adds two enhancements to DSH ask_user_question choice cards: right-clicking an option expands a per-option note that is merged into the submitted custom answer, and a footer field asks a side question answered by a fork subagent from the session context, read-only, with no write-back. Keeps left-click, skip, paging and the countdown working as before, and only claims generic choice cards, not plan review or approval cards. Supports DSH 0.2.x from 0.2.0-rc.1 (verified on 0.2.2-rc.1) and Node.js 20+. Derived from buaaflyaway/dsh-question-note (MIT) and inspired by MichengAI/dsh-btw (Apache-2.0); do not install it together with dsh-question-note — both take over the same ask_user_question card.

Right-click menu for the DSH workspace file tree: open a file, expand or collapse a folder, copy the absolute path, relative path or name, and reveal the item in the file manager.

VS Code/Codex-style file pane for DeepSeek Harness (DSH): split the right sidebar into viewer + file tree, with preview/pin tabs, right-click terminal, and Copy to Chat.

Click the chibi mascot and it reads the assistant reply aloud through your local IndexTTS 2.5 install. One character = one reference clip; a missing portrait just shows a placeholder. Ships no voices or artwork — the library lives on the user's own machine. Requires a local IndexTTS 2.5 install.

Wayland desktop control for GNOME/Mutter sessions: screenshot, OCR with screen coordinates, click by text, and batch input actions. Needs a Python 3 backend with python3-gi and GStreamer; OCR needs Tesseract.

Compiles LaTeX with the TeX Live installed on the machine: one `latex` tool typesets a formula into an SVG, PNG or PDF and a whole document into a PDF (Chinese text switches to xelatex with ctexart), writes the file into the workspace and returns a Markdown reference to it. A system-prompt section asks the model to write `$...$` and `$$...$$` instead of code fences, and when no TeX Live is found a banner above the composer offers a one-click BasicTeX or TinyTeX install.

Material library for dsh: collect a folder, file or note from a conversation, keep it in real folders with tags, browse it Finder-style, reopen the source chat's output in one click. Ships a materials_archive tool plus auto-filing rules: file a task's deliverable once, and every later scheduled run files the new documents by itself.

One-step local model onboarding plus a light harness for DSH. On load it probes loopback and private-network inference endpoints (llama.cpp, Ollama, vLLM, LM Studio), reads each model's context window and output budget from the backend, and registers the provider through settings, so a local model becomes selectable without hand-writing config. It then trims only that provider: masks the tool list through tools.restrict, drops named system-prompt sections and memory contexts, swaps the injected instruction block for a short one while preserving its first 80 and last 96 characters, and truncates tool-schema descriptions without touching structure or required fields. Cloud providers are returned as the same assembly object, untouched. The injected block is re-read from disk on every assembly, so editing the file takes effect on the next request with no reload. The panel in the plugin detail page is a live operations view: it shows whether the takeover is active and by which hook, how many characters the last assembly was trimmed from and to, and which providers are online (probed concurrently, with a real one-shot completion reporting latency and reply text per provider). If a local backend is not running, the panel offers a one-click launch: it probes the port first (never starting a duplicate), then starts the matching server (ollama serve, or a custom command you supply) detached and polls until the endpoint answers, clamping the wait to 3-600 seconds, reaping the child it just spawned if it never answers, and naming the paths it searched when it cannot find the binary. A stop button kills backends this plugin started (SIGTERM, then SIGKILL) and refuses to touch a server somebody else launched. When a model has just been downloaded and no backend exists yet, the panel can also scan the machine for .gguf files with hard caps (300 models, 20000 directory entries, Downloads only one level deep), start llama-server on the chosen one (skipping the .mmproj. vision projection and reusing a server that already answers), register the provider under the model id the backend reports, and run one real completion to prove it works. Before spawning anything it does a fit check that counts only the part of the file the GPU cannot hold: hostBytes = fileSize - VRAM, compared against max(total RAM - 2GB, free RAM). A file far larger than RAM is refused outright; a heavy host-side remainder is refused unless you confirm; the same remainder under mmap is only a warning, because the weights land in reclaimable page cache. A load-mode selector (auto / mmap / none / mlock / mmap+mlock) maps to llama.cpp --load-mode, and the default is whatever the engine picks. From 0.4.2 everything above is derived from the platform instead of assumed: home and data directories come from os.homedir() and the OS conventions (LOCALAPPDATA on Windows, ~/Library/Application Support on macOS, XDG_DATA_HOME elsewhere); backend binaries are looked up in the official install locations of each OS and can be pinned with OLLAMA_BIN, LLAMA_SERVER_BIN, VLLM_BIN or LMSTUDIO_BIN; model discovery walks DSH_LOCAL_MODELS_DIR, ~/models, ~/llama.cpp/models, ~/.cache/llama.cpp and the LM Studio data directory, with the WorkBuddy layout demoted to one candidate among them. VRAM is asked from nvidia-smi, then rocm-smi, then sysctl hw.memsize on Apple Silicon (flagged unified, so the same bytes are not charged twice), and any flip to a unified-memory budget is handled explicitly. Before building a command line the plugin runs llama-server --help once and keeps only the flags that build actually has, so older engines get --n-gpu-layers 99 and no KV quantization while newer ones get auto plus q8_0; anything it cannot probe is passed through rather than dropped. LM Studio is started with lms server start --port N rather than being lumped in with the engines that need a model argument, and vLLM gets its own --model example instead of llama.cpp syntax. Windows, macOS and Linux are all exercised in CI, including a windows-latest and a macos-latest job, because a cross-platform claim that has only ever run on one OS is not a claim. Two of those suites exist specifically to catch this machine's blind spots: one replays the whole suite with process.platform rewritten to each OS, and one deletes every advantage this development box has — no nvidia-smi, no rocm-smi, no sysctl, an empty PATH, a home directory with no models — and requires graceful degradation rather than a crash. That last one caught a real class of bug: several assertions hardcoded 'lms.exe', which cannot pass where the executable has no suffix. Measured on the reference machine: a 16.9GB 27.2B MoE with 14.5GB of VRAM holds a 285-691MB working set and sustains 76 tok/s after a 1000-2000 token warm-up, so file size alone is not a fit signal. From 0.4.3 the scanned models are shown as a table rather than a dropdown (one row per gguf, with its size and any fit warning), so you can see what is on disk before choosing. From 0.4.4 the delete button on the provider table removes the provider entry, not the weights file on disk. That distinction matters: what people actually want to clear out is the dead entry - one pointing at a port that never answered, one registered twice for the same port, one whose model file was deleted long ago - not a 15.8GB gguf. Deleting a config is undone by importing again; deleting a gguf is not. The removal goes through settings.mutate with an unset op on \['providers', id], because update merges layers: writing null there leaves a null provider key that the loader reads as a broken config rather than an absent entry, and only mutate/unset is implemented as Reflect.deleteProperty. The result is read back afterwards, because unset on a key that comes from a lower layer (the profile cordis.patch.yml or a home patch) does not delete it - it restores the inherited value, so the call succeeds while the entry stays. When the entry is still there the panel says so and points at the file to edit instead of reporting success, and a DSH whose settings service predates mutate() is told plainly rather than silently ignored. Deleting takes two clicks and clearing the confirmation is as easy as clicking another row; on success the online and baseURL caches are cleared and the tool surface is recomputed, since the provider list changed. The gguf itself is never touched by this plugin - the scanned-model table is display and selection only.VRAM reporting is driver-dependent. From 0.4.5 model discovery also reads Ollama's own storage: its blobs are named sha256-… with no extension, so extension matching could never list them. Weights are now accepted by extension OR by GGUF magic header (only dot-free files of at least 8MB, capped at 600 header reads per scan; obviously-not-weights extensions like .json/.md/.safetensors/.part are never opened). Ollama models are resolved from their manifests: the model layer is picked by mediaType application/vnd.ollama.image.model (never adapter/mmproj layers), the human-readable name is restored from the manifest path (…/qwen3/8b becomes qwen3:8b, …/latest stays bare), tags sharing one blob merge into a single row, and the metadata kv supplies name, quantization and context length. Adopting an Ollama model does not start a duplicate llama-server over the same weights: it confirms ollama serve answers on 11434 (launching it if not) and registers the provider under the tag the endpoint itself reports — the blob's sha256 name would never match anything, since 11434 lists qwen3:14b, not sha256-a8cc…. Two real-machine-only traps fixed on the way: existsSync('<file>/') returns true on Windows, so manifest-vs-directory branching now goes by parseable content instead of trailing-slash semantics; and the quantization label table had been copied from a stale ggml enum generation, labelling ggml_type 15 as Q5_K_S while ollama show reports Q4_K_M. Same-blob dedup is by (dev,ino), keeping whichever entry has a name. Verified on the reference machine: the scan goes from 1 row to 4 — qwen3:14b (8.64G) and qwen3:8b (4.87G) now appear with Q4_K_M badges — in 4ms; npm run verify exits 0 (launcher 57, portable 35, panel-host green including the linux/darwin simulated-platform runs); the new panel-host suite builds a real miniature Ollama store in tmpdir and points OLLAMA_MODELS at it, so results no longer depend on whether the test machine happens to have Ollama installed. From 0.4.6 the panel shows each model its real name instead of its file name, because some download tooling stores every weight under one generic file name, leaving the real name only inside the GGUF header. The scan now reads each file GGUF KV section - not a fixed-size head buffer, because tokenizer.ggml.tokens (hundreds of thousands of strings on a large MoE model) and the chat template push general.file_type past any window; and GGUF string arrays are interleaved (u64 length plus payload per element), so treating them as a length table walks the cursor off the rails and produces astronomically large reads. Reading and skipping are accounted separately: key names and types are always read, string values over 256KB and string arrays are only walked past without copying, non-string arrays over 64 elements are skipped outright, and a cursor past the file size stops the read, because an out-of-range position means the cursor is wrong rather than that a limit should be raised. The displayed name goes Ollama tag, then general.basename plus size_label, then general.name, then the file name, with the full string kept for the hover text since it usually carries internal build numbers; mmproj files are now identified by general.type as well as by name. A short read (truncated file) no longer feeds half a value into the parser. On the reference machine, reading one file header parses 44 keys in about 16ms, and a whole scan takes about 31ms. From 0.4.7 the smoke test no longer fails the first time and passes the second. The old code gave both request attempts one shared AbortController and one shared 30-second timer, so the total budget covered both rounds: a cold load of a large model burned it in round one, the abort left the signal permanently aborted, and the second round (the Ollama-style reasoning_effort: none retry) could not even be sent - which is exactly why the first click returned This operation was aborted and the second succeeded. Now each attempt gets its own controller and timer, a timeout retries once automatically (retryOnTimeout, on by default) because a first-request timeout almost always means the weights are still being read from disk, and non-timeout errors (refused connection, HTTP error) are not retried at all. Timeouts report themselves: the message says the wait exceeded smokeTimeout, whether a retry already happened, and points at the new smokeTimeout setting (seconds, default 60, clamped to 5-600) - port responding is not the same as tokens coming out, so it is a separate knob from launchTimeout. Unrelated: an example naming one specific model was dropped from the panel copy, since not every machine has that model downloaded, and the explanation now describes the mechanism instead. From 0.4.8 adopting a plain .gguf no longer registers an unrelated Ollama model. The port field used to follow the last click rather than the file: selecting an Ollama entry moved it to 11434, selecting a plain .gguf did not move it back, so a 11434 left over from an earlier click stayed. The server accepted it as given, probed the port, found Ollama answering and borrowed it (the skipped-launch log line about the port already answering is this path), and then the model id - derived from the file name - could not be matched against Ollama's /v1/models, where the fallback was to grab the first entry in the list. Embedding models tend to sort first, so the adopt registered a model the user never selected. Now the port follows the file: a plain .gguf landing on another engine's port (ollama 11434, vLLM 8000, LM Studio 1234) is moved to 8090 and the panel says so. Only ports belonging to a known engine are overridden - a hand-typed 9999 aimed at your own llama-server is left alone. The model-id fallback no longer guesses either: it takes the only entry when there is exactly one (a single-model backend may legitimately report a different id than the file name) and otherwise reports an error listing the ids it did see, rather than registering a wrong provider. From 0.4.9 the panel can no longer vanish. It used to be possible for the whole section to disappear from the plugin detail page while the host stayed up, the HTTP bridge kept answering, and no crash log appeared. The cause was a scope error: a helper was declared inside one component and referenced from another, which is valid JavaScript and passes a syntax check, so it only threw at render time - when the user pressed the scan button and React ran the state updater. The host wraps every slot entry in an error boundary whose fallback is an empty anchor, so the throw was contained silently: the panel was not uninstalled or crashed, it was replaced by an empty div. The helpers now live in the module scope both components share. The client half also gained its own test - a minimal React stand-in loads the real panel module, really calls the components, really runs the state updater at render time, and presses the scan button, so this class of error can no longer reach a release.

Cost pill at the right end of the composer stats row, showing the estimated cost of the current turn and the session total; clicking it opens a two-column panel with input, cache and output spend for the turn and the session, dialogue turns, today's and lifetime spend, and this session's cache-hit rate and cache saving. Rates follow the official DeepSeek price table including peak pricing (double on weekdays 09:00–12:00 and 14:00–18:00 Beijing time, statutory holidays excluded), each message is priced at the time it settled, and prices.json reloads without a restart.

Right-click menus for DSH sidebar rows: on DSH 0.2.2+ both rows use the host menus — workspace rows follow the session grouping (new session, copy path and reveal, pinned open-with apps, an open-with submenu, bulk delete) and session rows extend the menu that opens at the pointer with pinned open-with apps, an open-with submenu and permanent deletion of archived sessions; entries stay in the right-click menu by default and can be opted one by one into the shared "…" menu. On 0.2.1 the workspace menu is drawn by the plugin. Adapted from miao-ge/dsh-sidebar-context-menu and 0imzero/dsh-workspace-menu; do not install it alongside either - all of them attach right-click menus to the same sidebar rows.

Agent enhancements for DeepSeek Harness Desktop: prompt history, one-click optimize with undo, next-prompt prediction, conversation and tracked-file restore, model bill, context details with compact, Auto routing, and per-provider DeepSeek balance.

Manage GitHub and npm from inside DeepSeek Harness: multi-account switching, repository management, workspace Git tree with one-click push, pre-push Agent review, and npm package browsing, packing, pre-publish review and publishing.

Detect which installed apps have a newer version and update them with one click, downloading each vendor's full installer from its official site and installing it silently. Windows via winget, macOS via Homebrew casks, matching the machine's ARM64 or x64 architecture.

See what a conversation feeds the model, what your rules keep out, and what one click would change.

Two chibi Genshin Impact desktop pets (Columbina and Nahida), 22 transparent animations each, with desktop wandering, drag-and-throw physics, click reactions, idle chatter and chat through DSH models. A fan pack derived from PC2005-cloud/dsh-pet (MIT) — it reuses upstream's /dsh-pet-7340 route and ~/.dsh/dsh-pet data directory, so install it instead of dsh-pet, not alongside it; the character art is not MIT-licensed.