Plugins

Compiles LaTeX with the TeX Live installed on the machine: one `latex` tool typesets a formula into an SVG, PNG or PDF and a whole document into a PDF (Chinese text switches to xelatex with ctexart), writes the file into the workspace and returns a Markdown reference to it. A system-prompt section asks the model to write `$...$` and `$$...$$` instead of code fences, and when no TeX Live is found a banner above the composer offers a one-click BasicTeX or TinyTeX install.

One-step local model onboarding plus a light harness for DSH. On load it probes loopback and private-network inference endpoints (llama.cpp, Ollama, vLLM, LM Studio), reads each model's context window and output budget from the backend, and registers the provider through settings, so a local model becomes selectable without hand-writing config. It then trims only that provider: masks the tool list through tools.restrict, drops named system-prompt sections and memory contexts, swaps the injected instruction block for a short one while preserving its first 80 and last 96 characters, and truncates tool-schema descriptions without touching structure or required fields. Cloud providers are returned as the same assembly object, untouched. The injected block is re-read from disk on every assembly, so editing the file takes effect on the next request with no reload. The panel in the plugin detail page is a live operations view: it shows whether the takeover is active and by which hook, how many characters the last assembly was trimmed from and to, and which providers are online (probed concurrently, with a real one-shot completion reporting latency and reply text per provider). If a local backend is not running, the panel offers a one-click launch: it probes the port first (never starting a duplicate), then starts the matching server (ollama serve, or a custom command you supply) detached and polls until the endpoint answers, clamping the wait to 3-600 seconds, reaping the child it just spawned if it never answers, and naming the paths it searched when it cannot find the binary. A stop button kills backends this plugin started (SIGTERM, then SIGKILL) and refuses to touch a server somebody else launched. When a model has just been downloaded and no backend exists yet, the panel can also scan the machine for .gguf files with hard caps (300 models, 20000 directory entries, Downloads only one level deep), start llama-server on the chosen one (skipping the .mmproj. vision projection and reusing a server that already answers), register the provider under the model id the backend reports, and run one real completion to prove it works. Before spawning anything it does a fit check that counts only the part of the file the GPU cannot hold: hostBytes = fileSize - VRAM, compared against max(total RAM - 2GB, free RAM). A file far larger than RAM is refused outright; a heavy host-side remainder is refused unless you confirm; the same remainder under mmap is only a warning, because the weights land in reclaimable page cache. A load-mode selector (auto / mmap / none / mlock / mmap+mlock) maps to llama.cpp --load-mode, and the default is whatever the engine picks. From 0.4.2 everything above is derived from the platform instead of assumed: home and data directories come from os.homedir() and the OS conventions (LOCALAPPDATA on Windows, ~/Library/Application Support on macOS, XDG_DATA_HOME elsewhere); backend binaries are looked up in the official install locations of each OS and can be pinned with OLLAMA_BIN, LLAMA_SERVER_BIN, VLLM_BIN or LMSTUDIO_BIN; model discovery walks DSH_LOCAL_MODELS_DIR, ~/models, ~/llama.cpp/models, ~/.cache/llama.cpp and the LM Studio data directory, with the WorkBuddy layout demoted to one candidate among them. VRAM is asked from nvidia-smi, then rocm-smi, then sysctl hw.memsize on Apple Silicon (flagged unified, so the same bytes are not charged twice), and any flip to a unified-memory budget is handled explicitly. Before building a command line the plugin runs llama-server --help once and keeps only the flags that build actually has, so older engines get --n-gpu-layers 99 and no KV quantization while newer ones get auto plus q8_0; anything it cannot probe is passed through rather than dropped. LM Studio is started with lms server start --port N rather than being lumped in with the engines that need a model argument, and vLLM gets its own --model example instead of llama.cpp syntax. Windows, macOS and Linux are all exercised in CI, including a windows-latest and a macos-latest job, because a cross-platform claim that has only ever run on one OS is not a claim. Two of those suites exist specifically to catch this machine's blind spots: one replays the whole suite with process.platform rewritten to each OS, and one deletes every advantage this development box has — no nvidia-smi, no rocm-smi, no sysctl, an empty PATH, a home directory with no models — and requires graceful degradation rather than a crash. That last one caught a real class of bug: several assertions hardcoded 'lms.exe', which cannot pass where the executable has no suffix. Measured on the reference machine: a 16.9GB 27.2B MoE with 14.5GB of VRAM holds a 285-691MB working set and sustains 76 tok/s after a 1000-2000 token warm-up, so file size alone is not a fit signal. From 0.4.3 the scanned models are shown as a table rather than a dropdown (one row per gguf, with its size and any fit warning), so you can see what is on disk before choosing. From 0.4.4 the delete button on the provider table removes the provider entry, not the weights file on disk. That distinction matters: what people actually want to clear out is the dead entry - one pointing at a port that never answered, one registered twice for the same port, one whose model file was deleted long ago - not a 15.8GB gguf. Deleting a config is undone by importing again; deleting a gguf is not. The removal goes through settings.mutate with an unset op on \['providers', id], because update merges layers: writing null there leaves a null provider key that the loader reads as a broken config rather than an absent entry, and only mutate/unset is implemented as Reflect.deleteProperty. The result is read back afterwards, because unset on a key that comes from a lower layer (the profile cordis.patch.yml or a home patch) does not delete it - it restores the inherited value, so the call succeeds while the entry stays. When the entry is still there the panel says so and points at the file to edit instead of reporting success, and a DSH whose settings service predates mutate() is told plainly rather than silently ignored. Deleting takes two clicks and clearing the confirmation is as easy as clicking another row; on success the online and baseURL caches are cleared and the tool surface is recomputed, since the provider list changed. The gguf itself is never touched by this plugin - the scanned-model table is display and selection only.VRAM reporting is driver-dependent. From 0.4.5 model discovery also reads Ollama's own storage: its blobs are named sha256-… with no extension, so extension matching could never list them. Weights are now accepted by extension OR by GGUF magic header (only dot-free files of at least 8MB, capped at 600 header reads per scan; obviously-not-weights extensions like .json/.md/.safetensors/.part are never opened). Ollama models are resolved from their manifests: the model layer is picked by mediaType application/vnd.ollama.image.model (never adapter/mmproj layers), the human-readable name is restored from the manifest path (…/qwen3/8b becomes qwen3:8b, …/latest stays bare), tags sharing one blob merge into a single row, and the metadata kv supplies name, quantization and context length. Adopting an Ollama model does not start a duplicate llama-server over the same weights: it confirms ollama serve answers on 11434 (launching it if not) and registers the provider under the tag the endpoint itself reports — the blob's sha256 name would never match anything, since 11434 lists qwen3:14b, not sha256-a8cc…. Two real-machine-only traps fixed on the way: existsSync('<file>/') returns true on Windows, so manifest-vs-directory branching now goes by parseable content instead of trailing-slash semantics; and the quantization label table had been copied from a stale ggml enum generation, labelling ggml_type 15 as Q5_K_S while ollama show reports Q4_K_M. Same-blob dedup is by (dev,ino), keeping whichever entry has a name. Verified on the reference machine: the scan goes from 1 row to 4 — qwen3:14b (8.64G) and qwen3:8b (4.87G) now appear with Q4_K_M badges — in 4ms; npm run verify exits 0 (launcher 57, portable 35, panel-host green including the linux/darwin simulated-platform runs); the new panel-host suite builds a real miniature Ollama store in tmpdir and points OLLAMA_MODELS at it, so results no longer depend on whether the test machine happens to have Ollama installed. From 0.4.6 the panel shows each model its real name instead of its file name, because some download tooling stores every weight under one generic file name, leaving the real name only inside the GGUF header. The scan now reads each file GGUF KV section - not a fixed-size head buffer, because tokenizer.ggml.tokens (hundreds of thousands of strings on a large MoE model) and the chat template push general.file_type past any window; and GGUF string arrays are interleaved (u64 length plus payload per element), so treating them as a length table walks the cursor off the rails and produces astronomically large reads. Reading and skipping are accounted separately: key names and types are always read, string values over 256KB and string arrays are only walked past without copying, non-string arrays over 64 elements are skipped outright, and a cursor past the file size stops the read, because an out-of-range position means the cursor is wrong rather than that a limit should be raised. The displayed name goes Ollama tag, then general.basename plus size_label, then general.name, then the file name, with the full string kept for the hover text since it usually carries internal build numbers; mmproj files are now identified by general.type as well as by name. A short read (truncated file) no longer feeds half a value into the parser. On the reference machine, reading one file header parses 44 keys in about 16ms, and a whole scan takes about 31ms. From 0.4.7 the smoke test no longer fails the first time and passes the second. The old code gave both request attempts one shared AbortController and one shared 30-second timer, so the total budget covered both rounds: a cold load of a large model burned it in round one, the abort left the signal permanently aborted, and the second round (the Ollama-style reasoning_effort: none retry) could not even be sent - which is exactly why the first click returned This operation was aborted and the second succeeded. Now each attempt gets its own controller and timer, a timeout retries once automatically (retryOnTimeout, on by default) because a first-request timeout almost always means the weights are still being read from disk, and non-timeout errors (refused connection, HTTP error) are not retried at all. Timeouts report themselves: the message says the wait exceeded smokeTimeout, whether a retry already happened, and points at the new smokeTimeout setting (seconds, default 60, clamped to 5-600) - port responding is not the same as tokens coming out, so it is a separate knob from launchTimeout. Unrelated: an example naming one specific model was dropped from the panel copy, since not every machine has that model downloaded, and the explanation now describes the mechanism instead. From 0.4.8 adopting a plain .gguf no longer registers an unrelated Ollama model. The port field used to follow the last click rather than the file: selecting an Ollama entry moved it to 11434, selecting a plain .gguf did not move it back, so a 11434 left over from an earlier click stayed. The server accepted it as given, probed the port, found Ollama answering and borrowed it (the skipped-launch log line about the port already answering is this path), and then the model id - derived from the file name - could not be matched against Ollama's /v1/models, where the fallback was to grab the first entry in the list. Embedding models tend to sort first, so the adopt registered a model the user never selected. Now the port follows the file: a plain .gguf landing on another engine's port (ollama 11434, vLLM 8000, LM Studio 1234) is moved to 8090 and the panel says so. Only ports belonging to a known engine are overridden - a hand-typed 9999 aimed at your own llama-server is left alone. The model-id fallback no longer guesses either: it takes the only entry when there is exactly one (a single-model backend may legitimately report a different id than the file name) and otherwise reports an error listing the ids it did see, rather than registering a wrong provider. From 0.4.9 the panel can no longer vanish. It used to be possible for the whole section to disappear from the plugin detail page while the host stayed up, the HTTP bridge kept answering, and no crash log appeared. The cause was a scope error: a helper was declared inside one component and referenced from another, which is valid JavaScript and passes a syntax check, so it only threw at render time - when the user pressed the scan button and React ran the state updater. The host wraps every slot entry in an error boundary whose fallback is an empty anchor, so the throw was contained silently: the panel was not uninstalled or crashed, it was replaced by an empty div. The helpers now live in the module scope both components share. The client half also gained its own test - a minimal React stand-in loads the real panel module, really calls the components, really runs the state updater at render time, and presses the scan button, so this class of error can no longer reach a release.

Inject a personal rules file into the DeepSeek Harness system prompt, with silent-step and repeated-action loop guards editable from the settings dialog.

Long-term companion persona for DSH: trait dynamics, drift and catastrophe mutation, injected as a scoped system-prompt section.

Writes one short line into the system prompt only when a stress, energy or reward value crosses a threshold; the values rise on real session events and decay over time.

Local-only cross-session memory for DSH with tools, system-prompt injection, and a Settings page.

A long-term memory box for DeepSeek Harness settings: type it once and every new session carries it. 0.3.0 can also expand a rough note into a five-section requirement sheet that keeps every requirement of yours verbatim, marks anything the model had to invent as 推断 and deletable, and lists the dimensions you left open instead of deciding them for you.

Live persona switcher for DeepSeek Harness: drop-in personas under $DSH_HOME/personas, switch with /persona <name> or the persona_switch tool, no restart.

Configure a global system-prompt section with a multiline editor, an enable toggle, and persistent storage that preserves the original text.

A gold switch beside the composer that raises every model request to the strongest reasoning effort the current model declares and to its default max output tokens, and adds a system-prompt section asking for exhaustive, self-checked work.

Registers system-prompt sections that make the model reason in Simplified or Traditional Chinese, with strict/prefer modes and an optional reply-language policy. Adds a /thinking-zh command for per-session switching. Zero runtime dependencies.

Adds job-role prompts to the DSH composer: type - at the start of the input to pick a role, which becomes a reference chip in the draft and is then injected as a system prompt section on every turn of that conversation, so the instruction keeps applying without showing up in the transcript. Roles are added and edited on a Settings page and stored in ~/.dsh/dsh-role-prompts.md.

Replaces the harness identity block with its own prompt pack: three system-prompt sections (identity, rules, footer) in full, concise and dev presets, a per-turn rule card appended as a real user message, a remote announcement feed that falls back to a bundled copy offline, a GitHub Releases update check with an apply command, five `sunder_*` tools, and a read-only status section in Settings.

Keeps quotes out of the message body: quoting any passage from an assistant turn opens an editable quote tray above the composer, the quotes are injected into the next turn as system-prompt context (attributed with source and time), and an expandable quote row under that turn shows exactly which quotes were used. Quotes persist across page reloads and are claimed per turn; the host and client halves hand-shake on version and report a compatibility verdict.

Pins a selected passage of a finished user or assistant message as source text and keeps it in the model input across context compaction: each pin is recall-on-demand by default, or can be moved to a neutral resident system-prompt section or an emphasised highlighted one. Selections are aligned back to the source text with source-exact, source-normalized or rendered fidelity, and each of the three levels has its own character budget.

A prompt optimizer in the composer input tool row: pick a category and a template, then ✨ rewrites the draft in place with one-click undo. Pick from the Basic, Context and Image categories; you can cancel a run, and it shows elapsed time and token usage. Ships 15 templates covering task-instruction rewriting, step planning, safety-research framing, system-prompt role cards, and text-to-image / image-to-image prompts; context templates read the recent turns of the session for coreference resolution. Calls go through the host model service, and a settings section exposes the model and the budgets. Output guards check that user-written constraints survive, warning rather than auto-retrying. Adapted for dsh 0.1.7 and 0.2.

Switches every session's thinking and answers to Chinese — terse, a little wry, plain-spoken — while keeping proper nouns in English, and adds an "answer only what was asked" interaction rule. One global system-prompt section (order 10): no UI, no binaries, no network calls. Inactive under the minimal preset, which replaces the whole prompt with its own persona.

Bridges DSH to a local MemVault store: core memory blocks injected into the system prompt, finished turns extracted through MemVault's own pipeline, and a panel to browse, trace, review and replay what was stored.

Ponytail lazy-senior-dev mode as a native DeepSeek Harness skill, system-prompt section and six slash commands. Always available, level-switchable, no external process.

DSH 提示词工作台：看清 system prompt 的每一段、写下你自己的家规、体检重复与矛盾，并记下每次改动。

Uses a configurable system-prompt section to request a chosen reasoning language (Simplified Chinese by default), and expands thinking rows by default while preserving rows the user manually collapses.

Standing instructions edited in the DSH settings UI and injected into the system prompt of every subsequent turn.

Injects your own saved context entries as a Remember row after each user message, per turn or once per session, with a Settings editor and a manager page.