Plugins
Browse, filter, and install DeepSeek-Harness plugins.
5 plugins found
dsh-plc-decode
taoziliyouchong/dsh-plc-decode
Read PLC projects inside DSH — decode CoDeSys .project and Delta .dvp (both need Python 3.9+ on PATH) and Siemens S7-200 SMART .smart/.smartlib into readable reports and structured data, plus project diff, address audits, element-level read/write analysis and ladder-logic reconstruction.
dsh-nx
aaz111/dsh-nx
Siemens NX integration for dsh on Windows (requires a local Siemens NX install; tested only with NX 2512, and the FE tools need Simulation/Nastran licences): 71 tools that build and edit solids, surfaces, sketches, holes and tubes, run NX Nastran statics and modal studies, roll up assembly BOMs with pairwise clearance checks, and print A3 sheets with a real GB frame to PDF, all in a background NX session driven by JSON commands.
dsh-tiaforge
tia-forge/dsh-tiaforge
Bundles five TIA Portal skills (Siemens PLC docs lookup, ladder-logic generation, SimaticML-to-PNG rendering, scan-cycle simulation with PASS/FAIL scenarios, and a TiaLink gateway skill for driving a real TIA Portal project) and wires five MCP endpoints. Requires TiaLink (paid; Windows + TIA Portal V19/V20 + Openness) for real-project work, API keys for the four cloud services (100 free calls each, then paid; rendering is billed per call even on failure), Node 22+, and network access; program snippets are uploaded to tia.hubwiz.com.
dsh-mcp-tia
yh01010/dsh-mcp-tia
Bridges a local TIA Portal Openness MCP server into DSH: project tree and block listings, cross references, block logic read back as text, and SCL/LAD document import and compile through mcp__tia__* tools. Requires Windows with TIA Portal and the Openness user group, a third-party Openness MCP server such as bulaofen0036-coder/TIA_Portal_Openness_MCP, and a path edit after install — the plugin on its own registers no tools.
dsh-nx
27painter/dsh-nx
Drives Siemens NX 2406 and 2506 from DeepSeek Harness, plus NX 12: an executor that judges a journal run from its log rather than its exit code (NX returns 0 for a journal that swallowed its exception, and 0xC0000409 after a clean one), 16 typed tools over a resident batch NX, and a probe that keeps the three releases apart. From 1.3.0 it also reads the part back: dsh-nx verify opens a .prt inside NX and compares volume, mass, body count and bounding box against expected values, and dsh-nx deliver checks STEP, STL and PDF exports without starting NX. Windows only; NX 2406 is the reference release, 2506 expected. Requires a local Siemens NX install and a free NX licence seat; run `dsh-nx install` once, and the 16 MCP tools stay off until `NX_ENABLE_MCP=1` is set (the skill route works without it). Published on npm as dsh-nx.